Decision support system to find a skid trail network for extracting marked trees
Aidin Parsakhoo, Mohsen Mostafa, Shaban Shataee, Majid Lotfalianhttps://doi.org/10.17221/36/2016-JFSCitation:Parsakhoo A., Mostafa M., Shataee S., Lotfalian M. (2017): Decision support system to find a skid trail network for extracting marked trees. J. For. Sci., 63: 62-69.
Careful planning of skid trails as wood extraction routes in forests is an ongoing task and necessary for minimizing the environmental damage. The main objective of this study is to find skid trails to extract marked trees from stand sites to landing sites using a GIS-based decision support system (DSS) and network analysis techniques, where environmental information is incorporated into the objective. The techniques were applied in a stand where single trees are felled in near-to-nature conditions. This system is called a single tree selection cutting method. Parameters considered for mapping the terrain stability include slope, soil and stream network. The analytical hierarchy process was used to estimate the weights of these parameters. Routing between marked trees and log landing was done using a GPS-tracking survey and then the analysis was done using new route and service area tools in GIS. The service area tool shows accessibility of marked trees by skid trails. Results showed that on average the length of the route decreased by 6.65 and 19.22% with the use of a new route tool in compartments 29 and 4, respectively. In conclusion, DSS techniques increased accessibility of marked trees and decreased the length of the route.Keywords:
routing; slope stability; log landing; skidding; timber harvestingReferences:
Akay Abdullah E., Wing Michael G., Sivrikaya Fatih, Sakar Dursun (2012): A GIS-based decision support system for determining the shortest and safest route to forest fires: a case study in Mediterranean Region of Turkey. Environmental Monitoring and Assessment, 184, 1391-1407 https://doi.org/10.1007/s10661-011-2049-zAkbarimehr M., Naghdi R. (2012): Determination of most appropriate distance between water diversions on skid trails in the mountainous forest, north of Iran. CATENA, 88, 68-72 https://doi.org/10.1016/j.catena.2011.08.005Babapour Razieh, Naghdi Ramin, Salehi Ali, Ghajar Ismael (2014): A Decision Support System for Allocation of Mountain Forest Roads Based on Ground Stability. Arabian Journal for Science and Engineering, 39, 199-205 https://doi.org/10.1007/s13369-013-0833-5Cervero Robert, Kockelman Kara (1997): Travel demand and the 3Ds: Density, diversity, and design. Transportation Research Part D: Transport and Environment, 2, 199-219 https://doi.org/10.1016/S1361-9209(97)00009-6Cheng Min-Yuan, Chang Guey-Lin (2001): Automating utility route design and planning through GIS. Automation in Construction, 10, 507-516 https://doi.org/10.1016/S0926-5805(00)00103-5Chiou Chyi-Rong, Tsai Wei-Lun, Leung Yu-Fai (2010): A GIS-dynamic segmentation approach to planning travel routes on forest trail networks in Central Taiwan. Landscape and Urban Planning, 97, 221-228 https://doi.org/10.1016/j.landurbplan.2010.06.004Dean D J (1997): Finding optimal routes for networks of harvest site access roads using GIS-based techniques. Canadian Journal of Forest Research, 27, 11-22 https://doi.org/10.1139/x96-144Devlin G.J., McDonnell K. (2009): Performance accuracy of real-time GPS asset tracking systems for timber haulage trucks travelling on both internal forest road and public road networks. International Journal of Forest Engineering, 20: 45–49.Devlin Ger J., McDonnell Kevin, Ward Shane (2008): Timber haulage routing in Ireland: an analysis using GIS and GPS. Journal of Transport Geography, 16, 63-72 https://doi.org/10.1016/j.jtrangeo.2007.01.008Ezzati Sattar, Najafi Akbar, Bettinger Pete (2016): Finding feasible harvest zones in mountainous areas using integrated spatial multi-criteria decision analysis. Land Use Policy, 59, 478-491 https://doi.org/10.1016/j.landusepol.2016.09.020Filippo Sandro, Martins Ribeiro Paulo Cezar, Kahn Ribeiro Suzana (2007): A Fuzzy Multi-Criteria Model applied to the management of the environmental restoration of paved highways. Transportation Research Part D: Transport and Environment, 12, 423-436 https://doi.org/10.1016/j.trd.2007.05.004Girvetz Evan, Shilling Fraser (2003): Decision Support for Road System Analysis and Modification on the Tahoe National Forest. Environmental Management, 32, 218-233 https://doi.org/10.1007/s00267-003-2970-1Grushecky S.T., Spong B.D., McGill D.W., Edwards J.W. (2009): Reducing sediments from skid roads in West Virginia using fiber mats. Northern Journal of Applied Forestry, 26: 118–121.Inada Yoshie, Izumi Shinobu, Koga Motoya, Matsubara Shigehito (2014): Development of Planning Support System for Welfare Urban Design – Optimal Route Finding for Wheelchair Users. Procedia Environmental Sciences, 22, 61-69 https://doi.org/10.1016/j.proenv.2014.11.006Karlsson Jenny, Rönnqvist Mikael, Frisk Mikael (2006): RoadOpt: A decision support system for road upgrading in forestry. Scandinavian Journal of Forest Research, 21, 5-15 https://doi.org/10.1080/14004080500487102Keshkamat S.S., Looijen J.M., Zuidgeest M.H.P. (2009): The formulation and evaluation of transport route planning alternatives: a spatial decision support system for the Via Baltica project, Poland. Journal of Transport Geography, 17, 54-64 https://doi.org/10.1016/j.jtrangeo.2008.04.010Kooshki M., Hayati E., Rafatnia N., Taghi M. (2012): Using GIS to evaluate and design skid trails for forest products. Taiwan Journal of Forest Science, 27: 117–124.Kŏsir B., Krč J. (2000): Where to place and build forest roads. International Journal of Forest Engineering, 11: 7–19.Krueger Werner (2004): Effects of future crop tree flagging and skid trail planning on conventional diameter-limit logging in a Bolivian tropical forest. Forest Ecology and Management, 188, 381-393 https://doi.org/10.1016/j.foreco.2003.08.006Li-hai Wang (2000): Environmentally sound timber extracting techniques for small tree harvesting. Journal of Forestry Research, 11, 269-272 https://doi.org/10.1007/BF02844976Lihai W., Fulong M., Chunshan L., Zhongye G., Jianfeng G. (1996): Assessment of animal skidding and ground machine skidding under mountain conditions. Journal of Northeast Forestry University, 7: 63–72.Lubello D. (2008): A rule-based SDSS for integrated forest harvesting planning. [Ph.D. Thesis.] Rome, University of Padova: 213.Mahini Abdolrassoul, Abedian Sahar (): Routing of Road Network through Least Cost Pathway Algorithm to Minimize Impacts on Environment. Journal of the Indian Society of Remote Sensing, , - https://doi.org/10.1007/s12524-013-0351-7Mohammadi J., Shataei S., Namiranian M. (2014): Comparison of quantitative and qualitative characteristics of forests structure and composition in natural and managed forest stands (case study: ShastKalate forests of Gorgan). Journal of Wood & Forest Science Technology, 21: 65–83. (in Persian)Mohammadi Samani K., Hosseiny S.A., Lotfalian M., Najafi A. (2010): Planning road network in mountain forests using GIS and Analytic Hierarchical Process (AHP). Caspian Journal of Environmental Sciences, 8: 151–162.Najafi A., Solgi A., Sadeghi S.H. (2010): Effects of skid trail slope and ground skidding on soil disturbance. Caspian Journal of Environmental Science, 8: 13–23.Najafi A., Sobhani H., Saeed A., Makhdum M., Mohajer M.M. (2008): Planning and assessment and skidding networks. Croatian Journal of Forest Engineering, 29: 63–73.Nevečerel H., Pentek T., Pičman D., Stankić I. (2007): Traffic load of forest roads as a criterion for their categorization – GIS analysis. Croatian Journal of Forest Engineering, 28: 27–38.Parsakhoo Aidin (2016): Technical assessment of forest road network using Backmund and surface distribution algorithm in a hardwood forest of Hyrcanian zone. Forest Systems, 25, e059- https://doi.org/10.5424/fs/2016252-07815Philippart Julien, Sun Minghe, Doucet Jean-Louis, Lejeune Philippe (2012): Mathematical formulation and exact solution for landing location problem in tropical forest selective logging, a case study in Southeast Cameroon. Journal of Forest Economics, 18, 113-122 https://doi.org/10.1016/j.jfe.2011.11.002Rees W.G. (2004): Least-cost paths in mountainous terrain. Computers & Geosciences, 30, 203-209 https://doi.org/10.1016/j.cageo.2003.11.001Saaty T.L. (2003): Time dependent decision-making; dynamic priorities in AHP/ANP, generalizing from points to functions and from real to complex variables. In: Peniwati K. (ed.): Proceedings of the 7th International Symposium on the Analytic Hierarchy Process, Nusa Dua, Aug 7–9, 2003: 534.Solgi Ahmad, Najafi Akbar, Ezzati Sattar, Ferencik Michal (2016): Assessment of ground-based skidding impacts on the horizontally rate and extent of soil disturbance along the margin of the skid trail. Annals of Forest Science, 73, 513-522 https://doi.org/10.1007/s13595-016-0544-7Sterenczak K, Moskalik T (2015): Use of LIDAR-based digital terrain model and single tree segmentation data for optimal forest skid trail network. iForest - Biogeosciences and Forestry, 8, 661-667 https://doi.org/10.3832/ifor1355-007Vreeker Ron, Nijkamp Peter, Ter Welle Chris (2002): A multicriteria decision support methodology for evaluating airport expansion plans. Transportation Research Part D: Transport and Environment, 7, 27-47 https://doi.org/10.1016/S0969-6997(01)00005-9Wang Z., Zlatanova S., Moreno A., Oosterom P., Toro C. (2014): A data model for route planning in the case of forest fires. Computers & Geosciences, 68: 1–10.Xiang Wei-Ning (1996): A GIS based method for trail alignment planning. Landscape and Urban Planning, 35, 11-23 https://doi.org/10.1016/0169-2046(96)00303-9