Investigation of sectional operating elements for conveying agricultural materials

https://doi.org/10.17221/25/2019-RAECitation:Hevko R., Rohatynskyi R., Hevko M., Lyashuk O., Trokhaniak O. (2020): Investigation of sectional operating elements for conveying agricultural materials. Res. Agr. Eng., 66: 18-26.
download PDF

The paper covers the results of the theoretical and experimental investigation of the developed sectional operating element of a flexible screw conveyer designed for transporting bulk agricultural materials. In order to determine the correlation between the design parameters of the hinged screw sections and the minimum permissible radius of curvature of a processing line, the analytical dependences have been deduced. The results of the experimental studies aimed at determining the efficiency of a screw conveyer and the level of the grain material damage depending on the change in design, kinematic and technological parameters of an operating element are presented.

References:
Baranovsky V.M., Hevko R.B., Dzyura V.O., Klendii O.M., Klendii M.B., Romanovsky R.M. (2018): Justification of rational parameters of a pneumoconveyor screw feeder, INMATEH: Agricultural Engineering, 54: 15–24.
 
Fernandez J.W., Cleary P.W., Mcbride W. (2011): Effekt of screw desing on hopper draw dawn by a horizontal screw feeder. In: Witt P.J., Schwarz M.P.: 7th International Conference on CFD in the Minerals and Process Industries CSIRO, Melbourne, Australia, Dec 9–11, 2011: 1–6.
 
Hevko M.R. (2013): Substantiation of the parameters of sectional screw conveyers for transporting loose agriculture materials, Ternopil, National Technical University: 178.
 
Hevko R.B., Rozum R.I., Klendiy O.M. (2016): Development of design and investigation of operation processes of loading pipes of screw conveyors. INMATEH: Agricultural Engineering, 50: 89–94.
 
Hevko B.M., Hevko R.B., Klendii O.M., Buriak M.V., Dzyadykevych Y.V., Rozum R.I. (2018): Improvement of machine safety devices. Acta Polytechnica, Journal of Advanced Engineering, 58: 17–25. https://doi.org/10.14311/AP.2018.58.0017
 
Hevko R.B., Yazlyuk B.O., Liubin M.V., Tokarchuk O.A., Klendii O.M., Pankiv V.R. (2017): Feasibility study of mixture transportation and stirring process in continuous-flow conveyors. INMATEH: Agricultural Engineering, 51: 49–59.
 
Klendii M.B. (2007): Substantiation of the parameters of a reloading branchpipe of a screw conveyer. Ternopil, National Technical University: 137.
 
Li H., Liu W. (2015): The Exprimental Research of Screw Conveyor Feeding System. In: Deng X., Dong X. (eds): New trends in mechanical engineering and materials, Book Series: Applied Mechanics and Materials, 251: 101–103.
 
Lyashuk O.L., Rogatynska O.R., Serilko D.L. (2015): Modelling of the vertical screw conveyer loading. INMATEH: Agricultural Engineering, 45: 87–94.
 
Merritt A.S. (2008): Mechanics of tunnelling machine screw conveyors: a theoretical model. Geotechnique, 58: 79–94. https://doi.org/10.1680/geot.2008.58.2.79
 
Owen P.J., Cleary P.W. (2010): Screw conveyor performance: comparison of discrete element modelling with laboratory experiments. Progress in Computational Fluid Dynamics, 10: 327–333. https://doi.org/10.1504/PCFD.2010.035366
 
Roberts A.W. (1999): The influence of granular vortex motion on the volumetric performance of enclosed screw conveyors. Power Technology, 104: 56–67. https://doi.org/10.1016/S0032-5910(99)00039-X
 
Roberts A.W. (2015): Bulk Solids: optimizing screw conveyors. Chemical Engineering, 122: 62–67.
 
Rogatynska О., Liashuk О., Peleshok Т., Liubachivskyi R. (2015): Investigation of the process of loose material transportation by means of inclined screw conveyers. Bulletin of I. Pyliui Ternopil, 79: 137–143.
 
Rohatynskyi R.М., Diachun A.I., Varian A.R. (2016): Investigation of kinematics of grain material in a screw conveyor with a rotating casing. Bulletin of Kharkiv Petro Vasylenko National Technical Univarsity of Agriculture, 168: 24–31.
 
Schlesinger D., Papkov A. (1997): Screw conveyor calculation based on actual material properties. Powder Handling and Processing, 9: 321–325.
 
Špokas L., Adamčuk V., Bulgakov V., Nozdrovický L. (2016): The experimental research of combine harvesters. Research in Agriculture Engineering, 62: 106–112. https://doi.org/10.17221/16/2015-RAE
 
Sun X.X.; Meng W.J., Yuan Y. (2017): Design method of a vertical screw conveyor based on Taylor-Couette-Poiseuille stable helical vortex. Advances in Mechanical Engineering, 9: 1–11.
 
Tian Y., Yuan P., Yang F., Gu J., Chen M., Tang J., Su Y., Ding T., Zhang K., Cheng Q. (2018): Research on the principle of a new flexible screw conveyor and its power consumption. Applied Sciences, 8: 1038–1052. https://doi.org/10.3390/app8071038
 
Zareiforoush, H., Komarizadeh, M.H., Alizadeh, M.R. (2010): Effect of crop-screw parameters on rough rice grain damage in handling with a horizontal screw conveyor. Journal of Food, Agriculture and Environment, 8: 494–499.
 
download PDF

© 2020 Czech Academy of Agricultural Sciences | Prohlášení o přístupnosti