Microparticle composites on the basis of scrap utilizable in the field of agricultural production

https://doi.org/10.17221/44/2013-RAECitation:Valášek P., Brožek M. (2015): Microparticle composites on the basis of scrap utilizable in the field of agricultural production. Res. Agr. Eng., 61: 92-97.
download PDF
For renovation of functional surfaces of machines and devices for agricultural production it is possible to use, in addition to conventionally used methods, polymers with fillers – composites. The presence of microparticles in the polymeric matrix improves substantially the abrasive wear resistance and hardness. This contribution describes tribological properties of epoxy resin filled with chips of ferrous metals – the change of volume losses increase in dependence on the pressure increase (load) having effect on the worn surface. From the carried out experiments the considerable decrease of filled resin losses is evident compared with the resin without filler. At the same time the exponential increase of volume losses with the increased load was quantified in the course of tribological tests.
References:
Abenojar J., del Real J. C., Martinez M. A., de Santayana M. Cano (2009): Effect of Silane Treatment on SiC Particles Used as Reinforcement in Epoxy Resins. The Journal of Adhesion, 85, 287-301  https://doi.org/10.1080/00218460902880131
 
Basavarajappa S., Joshi Ajith G., Arun K. V., Kumar A. Praveen, Kumar M. Prasanna (2009): Three-Body Abrasive Wear Behaviour of Polymer Matrix Composites Filled with SiC Particles. Polymer-Plastics Technology and Engineering, 49, 8-12  https://doi.org/10.1080/03602550903206407
 
Berthelot J.M. (1998): Composite Materials – Mechanical Behavior and Structural Analysis. Berlin, Mechanical Engineering Series.
 
Brožek Milan (): Technical-economical evaluation of the overlays application on the plough shares. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 55, 129-136  https://doi.org/10.11118/actaun200755040129
 
Brožek Milan (2009): The turning of overlays using sintered carbide tools. The International Journal of Advanced Manufacturing Technology, 40, 438-446  https://doi.org/10.1007/s00170-007-1353-9
 
Chotěborský R., Hrabě P., Müller M., Savková J., Jirka M., Navrátilová M. (2009): Effect of abrasive particle size on abrasive wear of hardfacing alloys. Research in Agricultural Engineering, 55: 101–113.
 
Lee Gun Y, Dharan C.K.H, Ritchie R.O (2002): A physically-based abrasive wear model for composite materials. Wear, 252, 322-331  https://doi.org/10.1016/S0043-1648(01)00896-1
 
Mohan N., Natarajan S., KumareshBabu S. P. (2012): The role of synthetic and natural fillers on three-body abrasive wear behaviour of glass fabric-epoxy hybrid composites. Journal of Applied Polymer Science, 124, 484-494  https://doi.org/10.1002/app.34936
 
Müller M. (2011): Influence of surface integrity on bonding process. Research in Agricultural Engineering, 57: 153–162.
 
Müller M., Valášek P. (2012): Abrasive wear effect on Polyethylene, Polyamide 6 and polymeric particle composites. Manufacturing Technology, 12: 55–59.
 
Müller M., Hrabě P. (2013): Overlay materials used for increasing lifetime of machine parts working under conditions of intensive abrasion. Research in Agricultural Engineering, 59: 16–22.
 
Müller M., Valášek P., Novák P., Hrabě P., Paško J. (2011): Aplikace návarů a kompozitů v oblasti technologie pěstovaní a sklizně cukrové řepy. Listy cukrovarnické a řepařské, 9: 304–307.
 
Novák M. (2011): Surface duality hardened steels after grinding. Manufacturing technology, 11: 55–59.
 
Satapathy Bhabani K, Bijwe Jayashree (2002): Analysis of simultaneous influence of operating variables on abrasive wear of phenolic composites. Wear, 253, 787-794  https://doi.org/10.1016/S0043-1648(02)00158-8
 
Suchánek J., Kuklík V., Zdravecká E. (2007): Abrazivní opotřebení materiálů. Prague, Czech Technical University in Prague: 4–13.
 
Tenenbaum M.M. (1976): Soprotivlenije abrazivnomu izna-
 
šivaniju. Moscow, Mašinostrojenije.
 
Valášek P., Müller M., Proshlyakov A. (2012): Effect of sedimentation on the final hardness of polymeric particle composites. Research in Agricultural Engineering, 58: 92–98.
 
download PDF

© 2020 Czech Academy of Agricultural Sciences