Monitoring of selected emissions of internal combustion engine

https://doi.org/10.17221/72/2015-RAECitation:Králik M., Jablonický J., Tkáč Z., Hujo Ľ., Uhrinová D., Kosiba J., Tulik J., Záhorská R. (2016): Monitoring of selected emissions of internal combustion engine. Res. Agr. Eng., 62: S66-S70.
download PDF
The paper deals with the possibility of appropriate measurement and evaluation of emissions of nitrogen oxides. Development of exhaust systems which captures the solid particles emitted from engine, lost an objective assessment of the emission status of the diesel engine of agricultural tractor. Therefore, it is necessary to find a new method of measuring and quantifying the emission state of the diesel engine by measuring emissions, which should be economic and time-saving, but especially universal and sufficiently precise. The selected method should also provide sufficient information on such emissions that are subject to approval but they are not controlled during periodic checks.  
References:
Brožová H., Ružička M. (2009): Quantitative analysis of environmental impact of transport projects. Scientia Agriculturae Bohemica, 15: 216–225.
 
Colbeck Ian (2011): Exposure to PM10, PM2.5, PM1 and Carbon Monoxide on Roads in Lahore, Pakistan. Aerosol and Air Quality Research, , -  https://doi.org/10.4209/aaqr.2010.10.0087
 
Jukl Michal, Polcar Adam, Čupera Jiří (): Possibilities of Monitoring the Technical Condition of the Combustion Engine with Starter Load Current. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 62, 961-969  https://doi.org/10.11118/actaun201462050961
 
Lenďák P., Švec J., Jablonický J. (2007): Application of measurement methods of solid particle emission of diesel engine and their mutual comparison. Acta Technologica Agriculture, 9: 29–33.
 
Lombardini. Motor catalog (2007): Reggio Emilia: Lombardini.
 
Ma C.M., Hong G.B., Chang C.T. (2011): influence of traffic flow patterns on air quality inside the longest tunnel in Asia. Aerosol and Air Quality Research, 11: 44–50.
 
Ogunmola B.Y., Abolarin S.M., Adelaja A.O. (2013): On the Prediction of Pollutant Emission [NO<sub>x</sub>] in Internal Combustion Engine<i></i>. Advanced Materials Research, 824, 505-513  https://doi.org/10.4028/www.scientific.net/AMR.824.505
 
Takáts M. (1997): Měření emisí spalovacích motorů. Prague: ČVUT.
 
Tomic R., Sagi I., Ilincic P. (2008): Pollutant emission from internal combustion engines – overview of trends and emission-control technologies. Energy and the Enviromennt, 1: 187–197.
 
Robert Bosch (1993): Diesel – Einspritztechnik. Dűsseldorf, VDI-Verlag.
 
Yanowitz J., McCormick R.L., Graboski M.S. (2000): In-use emission from heavy-duty diesel vehicles. Environmental Science & Technology, 34: 729–740.
 
download PDF

© 2020 Czech Academy of Agricultural Sciences