Testing tyres of mobile forest machines in the soil testing canal

https://doi.org/10.17221/76/2020-RAECitation:

Helexa M., Kováč J., Krilek J. (2021): Testing tyres of mobile forest machines in the soil testing canal. Res. Agr. Eng., 67: 190–198.

download PDF

The article focuses on the research of tyre rolling resistances in the soil test channel environment. The specific monitored tyre was a Mitas TS05 10.0/75-15.3 10PR diagonal tyre with an arrow tread. The measurement itself was divided into two stages. In the first stage, measurements of rolling resistance were performed on a solid concrete base of the laboratory in order to determine the internal component of rolling resistance of the tyre. In the second stage, rolling resistances were monitored on forest soil deposited in the main body of the soil channel. The mentioned measurements of rolling resistance can be considered key for further evaluation of traction and energy properties of tyres. Despite some complications which occurred during the measurement, the results obtained indicate the conclusions reached by other researchers in the field. The main conclusion of this research is to confirm the justification of using the correct or optimal level of inflation pressures of tyres of mobile energy means depending on the properties of the surfaces on which they move in order to reduce not only their energy intensity but also greater environmental acceptability.

References:
Adams B.T. (2002): Central tire inflation for agricultural vehicles. [Ph.D. Thesis]. Champaign, University of Ilinois at Urbana–Champaign.
 
Arghir M., Leu A.I.V. (2013): Study of rolling resistance mechanism. Acta Technica Napocensis, 56: 443–448.
 
Bronček J., Kučera Ľ., Žarnay M., Poljak S., Čillík L. (2015): Konštruovanie 1. Žilina, EDIS: 622. (in Slovak)
 
Carvalheira P.F.V. (2012). An experimental method to measure the tire rolling resistance coeficient of an ultra – efficient vehicle. In: 15th International Conference on Experimental Mechanics, Porto, Portugal, July 22–27, 2012: 1–10.
 
Coutermarsh B. (2007): Velocity effect of vehicle rolling resistance in sand. Journal of Terramechanics, 44: 275–291. https://doi.org/10.1016/j.jterra.2007.03.001
 
Faraji M., Majd V., Saghafi B., Sojoodi M. (2010): An optimal pole-matching observer design for estimating tyre-road friction force. Vehicle Systems Dynamics, 48: 1155–1166. https://doi.org/10.1080/00423110903362594
 
Findura P., Korenko M., Kocira S., Gugala M. (2018): Monitoring of the manufacturing process in the selected organization. Agricultural, Forest and Transport Machinery and Technologies, 5: 83–92.
 
Grečenko A. (1978): Měření tahových vlastností terénních vozidel – Měřené veličiny. Zemědělská Technika, 24: 643–660. (in Czech)
 
Helexa M., Kováč J. (2019): Výskum Ťahových Vlastností Špeciálnych Lesníckych Kolesových Ťahačov. Zvolen, Vydavateľstvo TU: 121. (in Slovak)
 
Luchini J., Popio J. (2007): Modeling transient rolling resistance of tires. Tire Science and Technology, 35: 118–140. https://doi.org/10.2346/1.2737562
 
Malaga-Toboła U., Kwaśniewski D., Kuboń M., Findura P. (2019): Energy assessment of organic production. In: Krakowiak-Bal A., Vaverkova M. (eds): Infrastructure and Environment, London, Cham: 75–83.
 
Miege A.J.P., Popov A.A. (2005): The rolling resistance of truck tyres under a dynamic vertical load. Vehicle System Dynamics, 43: 135–144. https://doi.org/10.1080/00423110500140039
 
Pouget S., Sauzéat C., Benedetto H.D., Olard F. (2012): Viscous energy dissipation in asphalt pavement structures and implication for vehicle fuel consuption. Journal of Material Civil Engineering, 24: 568–576. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000414
 
Rebati J., Loghavi M. (2006): Investigation and evaluation of rolling prediction models for pneumatic tire of agricultural vehicles. Iran Agricultural Research, 24: 77–87.
 
Zemánek T., Neruda J. (2021): Impact on the operation of a forwarder with wheeled, tracked-wheel ortracked chassis on the soil surface. Forests, 12: 336–349. https://doi.org/10.3390/f12030336
 
download PDF

© 2022 Czech Academy of Agricultural Sciences | Prohlášení o přístupnosti